What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 23.06.2025 00:32

nine
What is lightning?
In schematic diagrams this is the symbol for a fuse:
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What does a fuse do?
Fans slam Gearbox CEO Randy Pitchford's message to "cost sensitive" fans - Eurogamer
The MOV will conduct when the voltage exceeds 50% of line voltage.
The other is “what does a “fuse” do?”
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
There are two important concepts here.
For this case there are devices called Metal oxide varistors (MOV).
[old diagram got deleted by accident]
Cholesterol-lowering drugs help combat Alzheimer’s disease - The Brighter Side of News
The third is lightning and “how it gets conducted into a home.”
a photo is worth a thousand words.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
He then describes Rainy Season and Lightning.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
'Mission: Impossible 8': Inside How They Shot Underwater Submarine - IndieWire
One
These are simplified answers to the original question, and does not change anything I wrote above.
[image of Common-mode choke]
So, the voltage could go up to 500 volts, and the fuse will not open up.
It also is a device that limits the change in current flow.
The bolt then partially travels down the line to your home.
What is the recommended frequency for using a red light therapy device for skin?
First Sentence:
An AC voltage/ current source, and an ac inductive load.
2024–10–10[John johnson John Johnson ]
Do you like wearing short skirts?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
It seems Mohan does not understand the difference between a comment and an Answer.
A fuse is a non-resetable over current circuit protector.
Ananda Lewis, Celebrated MTV VJ, Dead at 52 - Rolling Stone
but this device (an Inductor) … impedes the rapid changes in the current.
so, what happens?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Are there any real-life examples of prisoners who escaped from hospitals and were never caught?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Now when you have a certain ac resistance, then a current flows in a loop.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
How the Brain’s RNA Rings Are Formed - Neuroscience News
but I think this circuit , shows a few more pieces.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Why after 50 years of being straight do I constantly desire to suck cock?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
eight
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Upvotes:
But it can get overloaded, and no longer works.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
These devices are installed between the “hot” and “neutral” and protective ground.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At one ohm, the resistor has a maximum of 1 watt power.
(Dc diagram shown, AC is similar).
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–16 [ OO OLAOYE OYEBODE ]
This one hit behind the barn.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
There are three different concepts here that are getting confused.
This is where the MOV conducts again, and dissipated the energy.
what exactly is a ‘surge’ protector?
I post the exact comment here.
This device then solves the entire problem.
One is “what exactly is in a ‘surge protector’ ? ”
Here is a simplified AC power diagram.
This is 'the assistant's answer'
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Edit 2024–10.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Barnstars:
A circuit breaker is similar, but is resettable.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Because the load is inductive, the current lags the voltage.(by a bit).
He then describes the function of a fuse.
At least they know the answer if they wanted it.
But… the neutral is now “floating” because of the 1 ohm resistance.
This is where this question deviates from being a 'generic' question, and becomes more specific.
the problem then depends on "how fast does the fuse operate?".
He then asserts :
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].